POINT WIND CONE PWC LED AVIATION WIND CONES
Type: PWC-8061L-2-ON-FF-D-G-L-SM-T
Part Numbering Explanation for this model:
| |
| Part number: | PWC-8061L-2-ON-FF-D-G-L-SM-T |
| | |
| PWC: | Point Wind Cone |
| 806: | Low height pole 11-ft (3,3m) - non-frangible coupling |
| 1: | Sock Size 1; 8-ft (2,4m) |
| L: | Lighted Style I |
| 2: | 230VAC |
| ON: | Orange Nylon |
| FF: | Floor Flange (anchor bolts by others) |
| D: | LED Red Obstruction Light |
| G: | Rigid Machined Coupling in place of frangible coupling |
| L: | LED Floodlights in place of halogen |
| SM: | Stand Mount with bracket & junction box |
| T: | Tether of stainless steel for upper assembly |
Note: MT - Marine Treatment is now standard on all types.
Compliances:
- ETL Verified FAA L-806 FAA Advisory Circular 150/5345-27E
- ETL Verified FAA L-807 FAA Advisory Circular 150/5345-27E
- Registered ISO 9001:2015
- Transport Canada CAR 325.31
- ICAO Annex 14, Volume II Heliports, Paragraph 5.1
- Australia CASA MOS Part 139, Section 9.6
- UK CAP 437 ed. 8
A wind cone is used to visually indicate wind direction at airports and heliports. Point Lighting wind cones are installed at airports, hospitals, corporate headquarters and military bases around the world. Point recommends the PWC-8061L-1-ON-FF-G-T-SM for roof top heliport installations. This wind cone is easily serviced from a step ladder or unbolted to lower.
Size 1: 8-ft sock has 18-inch diameter frame
Size 2: 12-ft sock has 36-inch diameter frame
Size 4: 1.2m sock has 0.3m diameter frame Externally lighted only.
Size 5: 2.4m sock has 0.6m diameter frame
All lighted versions include obstruction light
Suitable for use at -55 to +55 degrees C
*
- -2 (230V) is for externally lighted only.
- -1 is for 120V externally lighted and for the universal AC voltage internally lighted option –B.
- -3 (24V DC) is for internally lighted only.
ROOF MOUNTED WIND CONES:
For increased safety, POINT LIGHTING CORPORATION recommends the use of the low height 806 type wind cone with option -G, rigid machined coupling to reduce frangibility, and option -T, stainless steel tether. Any roof mounted equipment will be a hazard to persons below if it is struck or otherwise comes apart due to high wind, excessive snow accumulation, etc.
We recommend option –SM (see page 2 in data sheet) for all roof sites and it can be a useful method for ground concrete pads as well.
PWC-8071L-1-ON-HBA
FAA L-807 SIZE 1
PWC-8061L-1-ON-FF
FAA L-806 SIZE 1
HAZARDOUS ATMOSPHERE SITES:
For a site requiring a wind cone with Class I, Division 2 rating, please see file WC115EX.
MERCURY FREE:
POINT LIGHTING CORPORATION wind cones are free of components containing liquid mercury. Competitors use electrical couplings containing mercury. Mercury is a hazardous substance and some governmental bodies now control the importation and disposal of products containing mercury.
PWC WIND CONE OPTIONS:
| OPTION | DESCRIPTION | 806 | 807 |
| | | | |
| HBA | Hinged Base Tapered Aluminum Pole | | YES |
| (includes anchor bolts) | | |
| FF | Floor Flange (anchor bolts by others) | YES | |
| SSP | Stainless Steel 316L Pole (add option –A and | YES | |
| consider option –SM) | | |
| HSP | Center Hinged Steel Pole with winch; gray painted | | YES |
| LIR | Fiberglass Frangible Pole | YES | |
| WM | Wall Mounted Steel Pole | | YES |
| A | Crating of pole (required for Type 807 export and | YES | YES |
| Type 806 -SSP) | | |
| B | Internally Lighted with LED floodlight & LED | YES | YES |
| obstruction light. Universal voltage 96 to 250VAC | | |
| (-1) and 12-24V for DC (-3) | | |
| C | Normal External Lighting plus Internally Lighted | YES | YES |
| D | LED Red Obstruction Light (required with option | YES | YES |
| –L; included with -B) | | |
| DIR | LED Red Obstruction Light & NVG Compatible | YES | YES |
| E | Double Red Obstruction Light | YES | YES |
| F | Obstruction Light Only (for an unlighted wind | YES | YES |
| cone) | | |
| FM | Flange Mount (requires option –SSP and see | YES | |
| page 4 in DataSheet) | | |
| G | Rigid Machined Coupling in place of frangible | YES | |
| coupling | | |
| H | Pole Painted with Red & White Stripes | YES | YES |
| J | Pole Painted Red | YES | YES |
| JB | Junction Box type PLB with blank coverplate | YES | YES |
| (see 0MOUNTINGS) | | |
| L | LED Floodlighting in place of halogen | YES | YES |
| LF | LED Floodlighting for use at US FAA airport | YES | YES |
| installations | | |
| | | YES | YES |
| BBS | Battery Backup System minimum 3 hours | YES | YES |
| P | FAA Photoelectric Controller (voltage type only) | YES | YES |
| JB1-P | FAA PEC with Junction Box & baseplate | YES | YES |
| (see 0MOUNTINGS) | | |
| SM | Stand Mount with bracket & junction box | YES | |
| T | Tether of stainless steel for upper assembly | YES | YES |
For further information, please refer to the attached DataSheet.