Stainless Steel 1.4404 (BS EN 10088-1 1995)
SSX 1. Size: 234x324x140mm.

 

 

1 Gland Plate (C) (Finish: Orbital)
IP Rating: IP66.
Certification Level: InMetro - Ex e apparatus certified.
Temperature Rating: T6.
Ambient Temperature (Degrees C): -20 to +40.

 

 

Entries:
Side C: 20.5mm x 5, B/Drain x 1
Terminals (30 x SAK2.5KRGBG)
End Plates (1 x APSAK2.5KRGBG)
End Stops (2 x EWK1)
Separators (2 x TW2.5)
Numbering (1--10. 11--20. 21--30)
Mounted on 1off TS32UNSL rail
Enclosure Earth Stud: 1 x EEAESM10SS Side B
Enclosure Earth Bar: Quantity 1, Orientation same as Rails, Position right(bottom) with 5 x TKACZB4 Clamps (1 x EAEB10X3B)
Door Earth Stud: 1 x EADESM6SS
Gland Plate Earth Stud: 1 x EAGPESM6SS (Position 20mm, 20mm)
Abtech Gel Label (1 x LABTGELCS)
Main Client Label (Material: StainlessSteel, Legend:  B-199-IJB-123 I.S. JB, Label Size: 20mm x 85mm, Colour: St/St/Black/St/St, Fixing Method: Screwed)
External Hinges: .
Breather Drain: 1 x EABDM2010SS.

 

 

Other Items:
1 x LABT13153 (Traffolyte 80x20mm I.S. label (INTRINSICALLY SAFE CIRCUITS)).
5 x GDM20CAAGBNP (Gland Abtech AAG-20c/NP M20 Nickel Plated Brass).
5 x EAETM20NP (Earth Tag M20 Nickel Plated).
5 x ABSWM20 (Serrated Washer M20).
5 x ABWM20NY (Washer M20 Nylon).
5 x CASHRM20 (Shroud M20).

 

 

Note 1: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.
Note 2: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use.
Note 3: Where applicable, stated delivery period commences upon receipt of final approved drawings.
Note 4: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.
Note 5: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.
Note 6: Please note that our minimum order charge is NOK 2.000,00 (excluding carriage & packing and VAT).