ESXCS151401GPC
Stainless Steel 1.4404 (BS EN 10088-1 1995) SXCS1.5.
Size: 306x306x140mm. 1 Gland Plate (C) (Finish: Electropolished)
IP Rating: IP66.
Certification Level: ATEX, IECEX - Ex db eb Apparatus certified (Suitable for use in Zone 1/21 Areas).
Temperature Rating: T4. Ambient Temperature (Degrees C): -40 to +60.
Entries:
Side C: 20.5mm x 2, Breather drain x 1
Terminals: (22 x SSK0525KER-EXWH) SSK 0525 KER-EX 4mm² White Ceramic Terminal (0501059)
End Plates: (1 x D-SSK0525KERGR) D-SSK 0525 KER White
End Plate (0201061)
End Stops: (2 x E/1) E/1 Metal End Stop (1201044)
Numbering: (TR01: 1-22)
Terminals: (2 x WFF35WEBG) WFF 35 Wemid Beige M6 Stud Terminal (1028300000)
Mounted on: 2off TS32UNSLSS Rail TS32 Unslotted Stainless Steel 2M/CRN (0293220000)
Stud: 1 x EEAESM10SS Enclosure Earth Stud Welded M10 Stainless Steel Side B
Stud: 1 x EADESM6SSDoor Earth Stud M6 Stainless Steel
Stud: 1 x EAGPESM6SS (Position 20mm, Gland Plate Earth
Stud M6 Stainless Steel (Position 20mm, 20mm)
Mounting Plate: 1 x EAMPS15MS .
External Hinges: position: Default.
Blanking Plugs: 1 x EAPM20CMP757NP .
Breather Drain: 1 x EABDM2010SS
Special Finish: ELECTRO-POLISHED.
Other Items:
0.20 x 100209-0-4 (EATS35UNSL).
2 x ABLNM20NP (Locknut M20 Nickel Plated).
2 x ABWM20NY (Washer M20 Nylon).
***TS35 DIN RAIL TO BE PLACED SIDE BY SIDE WITH THE TERMINAL G RAIL*** ALLOWING FOR CREEPAGE AND CLEARANCE.***
***PART No. 07-7311-61TW/0.00*** BARTEC RESISTOR X 2 FITTED TO TS35 DIN RAIL*** Supplied by others and not Abtech..
Note 1: Abtech designate the orientation of enclosures in a clockwise manner, Side A = Top, Side B = Right Hand Side, Side C = Bottom and Side D = Left Hand Side
Note 2: Unless specified otherwise all machining tolerance shall be class ‘m’ to BS EN 22768-1:1993, except for circular cable gland entries in junction boxes where the tolerance shall be +/- 0.25mm for hole sizes and +/- 2.0mm for hole positions. Where such entry positions are not specified they will be located at our discretion.
Note 3: Where the quotation is for hazardous area certified product please refer to the attached detailed specification sheet; in particular the permitted areas of use. Note 4: Where applicable, stated delivery period commences upon receipt of final approved drawings.
Note 5: Unless otherwise stated, carriage and packing charges are based upon a single delivery. If you decide to receive goods on multiple deliveries we reserve the right to levy additional carriage charges.
Note-6: Delivery is an approximation based on available capacity at time of quote. Firm delivery dates will be confirmed upon order confirmation.
Note 7: Whilst we make every effort to correctly interpret your requirements, please be aware that it is your responsibility to ensure that the quoted items are checked for suitability against your original enquiry. Orders subsequently received which reference this quotation, will be treated as an order for the items quoted above and not for the items detailed in your original enquiry.
Note 9: Unless specified on the quotation, Abtech enclosures and control stations are supplied without internal wiring between terminals, operators and contact blocks or to any additional components that may be installed.
Note 10: Due to extreme variation in raw material costs of stainless steel, GRP and plastics; combined with rising fuel surcharges for freight, the prices quoted cannot be assured out with the validity period. Abtech also reserves the right to amend pricing of any valid quotes if raw material prices increase by more than 5% within a 14-day period (relevant market price indexes available upon request)
Drawings:If required - £100.00 per drawing (£25.00 per revision)
Validity: 30 days (10.10.2024)
Estimated Dispatch: 9 weeks
Ref: Tank overfill project #18191