2000322
6404
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
|
Totalt antall treff:
|
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
ATEX Cable Gland PF8022000E M20
EExeII IP66 & IP68 BlackNylon oø10-14mm
|
|
Cable Gland Type PF - (Single Compression Nylon Gland)
Peppers “PF” type glands, certified Increased Safety Ex e are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Group II. They are manufactured from polyamide and provide a controlled pull resistant displacement seal on the cable outer sheath providing both Ex e & IP protection. The gland has been tested to IP66 & IP68 to 50 metres and is fully compliant with the Ex e standard with no reduced impact restriction. Available in black or blue, in a range of thread forms complete with an IP flat washer on metric entry threads.
| Operating Temperature: | M16-M63: -35°C to +95°C ° |
| M12: -20°C to +80°C |
| Materials: | Polyamide |
| IP Rating: | IP66 & IP68 (50 metres - 30 minutes) |
| Impact Resistance: | 7Nm |
| Optional Accessories: | Nylon Locknut / IP Washers |
| Options: | Colour: Black / Blue |
| Industrial Non-Ex version:
Omit “E” from part number |
Gland
Size | Entry
Thread Size | Nominal
Protrusion
[L] | Cable
Sealing Range | ISO
Thread
Length
[E] | Part Number |
12 | M12 x 1.5 | 23.0 | 4.0 - 6.5 | 8.0 | PF8021200E |
16 | M16 x 1.5 | 28.0 | 5.0 - 8.0 | 10.0 | PF8021650E |
16 | M16 x 1.5 | 28.0 | 5.0 - 10.0 | 10.0 | PF8021600E |
20 | M20 x 1.5 | 28.0 | 7.0 - 12.0 | 10.0 | PF8022050E |
20 | M20 x 1.5 | 28.0 | 10.0 - 14.0 | 10.0 | PF8022000E |
25 | M25 x 1.5 | 36.0 | 10.0 - 14.0 | 10.0 | PF8022550E |
25 | M25 x 1.5 | 36.0 | 12.0 - 18.0 | 10.0 | PF8022500E |
32 | M32 x 1.5 | 42.0 | 16.0 - 25.0 | 10.0 | PF8023200E |
40 | M40 x 1.5 | 52.5 | 22.0 - 32.0 | 10.0 | PF8024000E |
50 | M50 x 1.5 | 54.5 | 28.0 - 38.5 | 12.0 | PF8025000E |
63 | M63 x 1.5 | 55.5 | 40.0 - 48.0 | 12.0 | PF8026300E |
Compliance Standard: EN 60079-0, EN 60079-7, EN 61241-0, EN 61241-1
IEC 60079-0, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529
Certification:
ATEX: II 2 GD Ex e II / Ex tD A21
IECEx: Ex e II / Ex tD A21
GOST-R: Ex e IIU
UL: ANSI/UL514B
CSA: CAN/CSA C22.2
VDE: DIN EN 50262 / VDE 0619
LLOYD’S: Enclosure Systems (Part 1B)
Certificate No.:
ATEX: LCIE 07ATEX6082X/02
IECEx: LCI 10.0008X
GOST: POCC FR M14.B00153
UL: E306665
CSA: E306665
VDE: 131210
LLOYD’S: 10/00056
Notes:
* The user should seek expert advice if intending to combine flammable and combustible dust in one environment/installation.
* Assembly instructions must be read prior to installation and adhered to in full.
* If used in a threaded entry, NPT versions may protrude more than “L” length due to engagement of tapered threads.
* Industrial Non-Ex versions are not supplied with IP thread sealing washer.
* Industrial Non-Ex versions are only available in Black.
For further details, please see DataSheet.