2000323
7316
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
|
Totalt antall treff:
|
|
Antall artikler funnet:
|
Handlevogn
Handlevognen er tom.
Ex-e Nylon Stopping Plug SPMHN/M20
IP66&IP68 @2m Glass filled nylon
|
|
Glass filled nylon dome head Exe stopping plugs - SPMHN Series
SPMHN Series of Dome Head Stopping Plugs provide a method of blanking off unused entries in hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained.
Dome Head Plugs are designed to be installed with a hex (Allen) key from the outside of an enclosure and are supplied complete with a captive o-ring seal. The o-ring is located within a recess on the face of the product, helping to protect the o-ring from environmental damage and ensuring it is not displaced during installation.
SPMHN Dome Head Stopping Plugs are designed for hazardous area applications and are certified to protection concepts Exe “Increased Safety” for use in Zone 1 and Zone 2 applications.
Approved to the latest international standards stopping plugs can be supplied with ATEX (CENELEC), IECEx, and GOST-R hazardous area certificates.
In addition CSA approval certificates can be supplied to cover use in North American and Canadian Class I Division 2 and Class I Zone 1 applications.
Technical Data Table